No results found.
    Navigation

    Kunnskapsbase

    Create another Wifi Network

    How to create an additional Wifi network for your guests.

    1.) Go to Config (geeky) and login.

    2.) Navigate to Network -> Wireless.

    3.) Create the network under the Wifi type you would like to use.  For 2.4, click 'add' on the 802.11bgn radio.  For 5ghz, click the 'add' on the 802.11acn radio.

    4.) Set your Wifi basic settings.   *Important - under 'Network' select 'lan'.

    5.) Set the Wifi security settings:

    6.) Optional settings.  If you want to create a 'guest network' that cannot talk to your other devices, click 'isolate clients' under advanced.

    7.) Click 'SAVE'

    Your new network should show up within a few minutes.

    • instyconnect
    • 4 brukere syntes dette svaret var til hjelp

    Var dette svaret til hjelp?

    Relaterte artikler

    How to manually remove the Insty Connect Setup wifi network

    If you're having trouble removing the insty_connect_setup wifi network, click here. 1.) Click on...

    Setting up the YaMon Bandwidth Monitor on the Insty Connect

    How to setup the YaMon Open Source bandwidth monitoring tool inside the Insty Connect.  

    How to change MTU

    How to change the MTU on the Insty Connect. 1.) Go to the Config -> Network -> Interfaces...

    How to adjust MSS Clamping

    How to adjust MSS clamping on Insty Connect. 1.) Go to Config -> Network -> Firewall. 2.)...

    How to use campground Wifi - use Wifi as WAN

    THIS ARTICLE IS FOR FIRMWARE BELOW 1.2.2 IF YOU HAVE FIRMWARE 1.2.2 OR ABOVE, PLEASE SEE THIS KB...