No results found.
    Navigation

    Knowledgebase

    How to block Wireless clients from accessing the Internet full time, or specified times.

    You can block certain Wireless devices from making requests to the Internet.  To do this we will utilize the Firewall in the Config (geeky) section of the Insty Connect.

    1. Navigate to Config (geeky) → Network → Firewall → Traffic Rules.
    2. Click Add and specify:
      • Name: Filter-Parental-Controls
      • Protocol: Any
      • Source zone: lan
      • Destination zone: wan
      • Action: reject
    3. On the Advanced Settings tab specify:
      • Source MAC address: 00:11:22:33:44:55  (you can choose the device from a drop down list if it's already connected to the network)
    4. On the Time Restrictions tab specify:
      • Week Days: Monday, Tuesday, Wednesday, Thursday, Friday
      • Start Time: 21:30:00
      • Stop Time: 07:00:00
    5. Click Save, then Save & Apply.

     

    If you would like to completely disable the Internet connection, skip step 4 for time restrictions.

    • instyconnect
    • 0 Users Found This Useful

    Was this answer helpful?

    Related Articles

    How to manually remove the Insty Connect Setup wifi network

    If you're having trouble removing the insty_connect_setup wifi network, click here. 1.) Click on...

    Setting up the YaMon Bandwidth Monitor on the Insty Connect

    How to setup the YaMon Open Source bandwidth monitoring tool inside the Insty Connect.  

    How to change MTU

    How to change the MTU on the Insty Connect. 1.) Go to the Config -> Network -> Interfaces...

    How to adjust MSS Clamping

    How to adjust MSS clamping on Insty Connect. 1.) Go to Config -> Network -> Firewall. 2.)...

    How to use campground Wifi - use Wifi as WAN

    THIS ARTICLE IS FOR FIRMWARE BELOW 1.2.2 IF YOU HAVE FIRMWARE 1.2.2 OR ABOVE, PLEASE SEE THIS KB...